Skip to main content

How To Transfer Embroidery Designs to USB Stick to Embroidery Machine

By Lizzsews

 This article is brought to you by Lizzsews.

Ever bought a machine embroidery design from somewhere like Etsy or Creative Fabrica and did not know how to transfer that to your embroidery machine?

Or have you just purchased a design and don't know how to now transfer that design to your embroidery machine?


Either way, here's how!

After you have purchased an embroidery design, you will most likely get a zip file. First, you want to unzip the file.

 On a Chromebook, you will double-tap the file

On windows, you will want to right-click the file and select the option to unzip or extract all

And on a Mac, you will right-click on the file and click into services, from there you will want to click unzip

Laptop with a notebook and pen on the side, a pair of glasses on top and an iphone

Now you have successfully unzipped the file! After that, you will want to drag the format that your machine uses (for example Brother is PES) to where the USB is in files. Or you can click the format, click CTRL+C and click into the USB in files, and click CTRL+V.

If you’re not sure which file format you need, no worries! You can either look it up or just use DST, DST is a file format that is compatible with all embroidery machines. 

A bunch of USB sticks in a pile

We're almost done!

You now have your embroidery design on your USB, all you have to do is get that onto your embroidery machine! Lastly, you want to eject the USB stick and put it into your machine. 

Now select your file, and stitch out the embroidery design! 

Don't know what USB will be compatible with your machine? 

Honestly, it’s hard to say which USB’s will work, if you use one with too much storage the machine might not read it, but if you use one with too little storage the machine might also not read it. So just take the USBs around your house and try them out!


Recommended read: 10 Machine Embroidery Projects to Do During Quarantine

Recommended read: How to embroider patches

Be sure to like and leave a comment and let me know what you think! And don't forget to subscribe to get notified for my next blog post!

Labels:

Comments

  1. Gabbie28 April 2020 at 19:36

    I have a good understanding of how to transfer files onto my machine but have questions about fonts.

    ReplyDelete

Post a Comment

Popular posts from this blog

10 Things You Need To Start Machine Embroidery Today

By Lizzsews
 This article is brought to you by  Lizzsews . How to start machine embroidery! Here’s everything that you need to get started with machine embroidery! Without spending too much! Are you interested in sewing? Recommended read:  10 things you'll need to start sewing! 1. You are going to need an embroidery machine . You can use any embroidery machine you want. Here are a couple of examples: The Brother se600. This machine can do both sewing and embroidery, and is the best budget embroidery machine! I highly suggest this machine. The brother pe550D! This is an embroidery-only machine, with awesome Disney embroidery designs! The brother se1900. I recommend the Brother brand for sewing and embroidery machines. To note here: determine your budget, determine how much you have to spend on embroidery supplies (and blanks ) and how much you have to spend on your machine. Purchase the largest embroidery hoop that you can afford! The se600 is an amazing machine and I highly recomm
5 comments
Read more

8 Reasons Why Your Upper Thread Is Shredding On Your Embroidery Machine

By Lizzsews
 This article is brought to you by  Lizzsews . Here are some reasons why your top thread might be shredding while you’re embroidering! Starting machine embroidery is definitely a challenge, and troubleshooting is hard.  Recommended read: 10 Things you need to start machine embroidery today Often when your top thread is shredding, it’s caused by when the thread goes through the eye of the needle or while it’s going through the thread guides.  1. A dull or bent needle How long has it been since you’ve changed that needle? It might be time to swap it out! A needle only lasts about 8-10 hours of stitching, this amount of time may vary depending on what you are making. It’s good to have lots of needles on hand. Recommended read: When should I change the needle for machine embroidery 2. Are you using the right needle for the project? Are you embroidering heavier fabrics? Like denim or leather? If so, you’ll want to use a heavier needle size like 90/14. If you’re just embroidering mid-weight
Post a Comment
Read more

Guide To The Three Main Machine Embroidery Stabilizers

By Lizzsews
 This article is brought to you by  Lizzsews . Here is everything that you need to know about the three main machine embroidery stabilizers. Stabilizers are important in machine embroidery; they prevent puckering and support the fabric.  The stabilizer goes underneath the fabric you are embroidering. Although there are some stabilizers that will go on top of certain types of fabric, this is called a topper.  A bottom stabilizer is always needed, you can never embroider without stabilizer, but a stabilizer topper is only needed for certain blanks. The three main types of stabilizers are cutaway, tearaway, and wash away.  The first is a cutaway stabilizer. A cutaway stabilizer can be used on clothes and many different types of fabric. The cutaway stabilizer is permanent and is mainly designed for knit fabric. It is non-woven and helps get rid of pulled or sagging stitches.  The cutaway stabilizer has a lot of stretch resistance and stays intact after wearing, using, and launderin
1 comment
Read more