Skip to main content

How To Sew Reusable Snack Bags

 This article is brought to you by Lizzsews.

Are you interested in making reusable snack bags? They are perfect for work, school lunches, a small hike, or even a picnic! These make excellent gifts for any occasion and are a great way to reduce your use of plastic bags.

What you will need:

  • 100% cotton fabric, quilting cotton works best!
  • PUL fabric* 
  • Plastic zipper, you want it to be plastic and larger than the short side of the fabric so you can cut the excess off at the end.
  • Rotary cutter (or scissors) 
  • Self-healing cutting mat (If you're using scissors you won't need this) 
  • Pins 
  • Fabric pen or something to mark the fabric with 
  • Iron + ironing board 
  • Measuring tape 
  • Sewing machine
  • Seeing thread
  • Zipper foot 
  • Sewing machine needle
*PUL stands for Polyurethane Laminate and is a compound fabric made by laminating a cloth fabric to Polyurethane. PUL fabric can be used for medical bedding, mattress protectors, cloth menstrual pads, wet bags, diapers, snack bags and more.

Recommended read: What is pul fabric

Because you are making snack bags and the PUL fabric will be touching your food, you need to make sure that the fabric is BPA-free, food-safe, breathable, water-resistant and washable.

The steps:

   1. Cut a rectangle 7” x 10” of cotton fabric and 7" x 9.5" of PUL fabric. 


You want the PUL fabric to be a bit shorter than the cotton fabric on the long side as it is stretchy and ends up being the same size!

   2. Place the rectangle of cotton fabric face up, and pin the zipper in place at the top of the fabric on the short end, zipper face down. 

The top stop (the two devices at the top end of the zipper to prevent the slider from coming off the zipper) should be on the left. 

Make sure the zipper is on the shortest side of the rectangle and that the zipper is longer than the fabric. 


   3. Place the PUL fabric on the top and pin it in place. 

The "right side" of the PUL is a polyester knit and is the side that is mainly used to show the pattern. The "wrong side" of the PUL is the laminate and is shiny and smooth.

Both sides of the PUL fabric are waterproof and food-safe, but you'll want to have the side that is shiny be touching the food so place the shiny side, or the "wrong side" down.

Please note that the right side of the PUL fabric will not be seen.

   4. Attach the zipper foot and sew along the top, you should be sewing all three layers. Make sure you backstitch at the beginning and the end!



   5. Take the piece of cotton fabric and fold it over on top of itself right sides together. Place the edge that was not sewn and pin it to the side of the zipper that was not sewn. 



   6. Take the piece of PUL fabric and fold it over on top of itself the wrong side together (shiny side together). Place the edge that was not sewn and pin it to the side of the zipper that was not sewn (the same thing that you did with the cotton fabric).

 

   7. Sew along where you pinned, you should be sewing all three layers. 


   8. Flip everything over and make sure that the zipper handle is at the top and facing down. 

Shift the fabrics so that you have just a little bit of cotton fabric at the top above the zipper and iron it in place. 

Move the snack bag so that you can iron the long side of the cotton, don't iron the pul fabric or it will fuse together with itself.


   9. Place the pul fabric over so that it is right on top of the cotton fabric. Move the slider (the device that moves up and down the zipper) into the middle of the zipper. Pin down that side and the other side.


   10. On the other side (the closed side) make a marking 2” up. And change the foot on your machine back to your regular sewing foot.

   11. Sew down the first side (the side without the marking) double stitching at the beginning, over the zipper and at the end. 


   12. Sew down the other side (the side with the marking), double stitching at the beginning and over the zipper. Stop sewing when you get to the marking you made, double stitch, and cut your threads. 

   13. Fold the PUL fabric up and out of your way and sew down the rest on just the cotton fabric. Do not sew the PUL closed here or you won't be able to turn your snack bag inside out.


   12. Cut off the excess zipper tape and flip the snack bag half inside out (keep pul fabric as the outside) using the PUL fabric. 


(I could have cut off more of the zipper tape here)


   13. Topstitch the gap in the PUL fabric closed.

Recommended read: What is topstitching

   14. Flip the snack bag inside out all the way and poke the corners out. 



Recommended read: How to sew tea towels
Recommended read: How to sew scrunchies
Recommended read: What are feed dogs

Leave a comment below and let me know if you made some snack bags! And don't forget to subscribe to stay up to date with all of Lizzsews new articles. See you next time!

Comments

Popular posts from this blog

10 Things You Need To Start Machine Embroidery Today

 This article is brought to you by  Lizzsews . How to start machine embroidery! Here’s everything that you need to get started with machine embroidery! Without spending too much! Are you interested in sewing? Recommended read:  10 things you'll need to start sewing! 1. You are going to need an embroidery machine . You can use any embroidery machine you want. Here are a couple of examples: The Brother se600. This machine can do both sewing and embroidery, and is the best budget embroidery machine! I highly suggest this machine. The brother pe550D! This is an embroidery-only machine, with awesome Disney embroidery designs! The brother se1900. I recommend the Brother brand for sewing and embroidery machines. To note here: determine your budget, determine how much you have to spend on embroidery supplies (and blanks ) and how much you have to spend on your machine. Purchase the largest embroidery hoop that you can afford! The se600 is an amazing machine and I highly recomm

8 Reasons Why Your Upper Thread Is Shredding On Your Embroidery Machine

 This article is brought to you by  Lizzsews . Here are some reasons why your top thread might be shredding while you’re embroidering! Starting machine embroidery is definitely a challenge, and troubleshooting is hard.  Recommended read: 10 Things you need to start machine embroidery today Often when your top thread is shredding, it’s caused by when the thread goes through the eye of the needle or while it’s going through the thread guides.  1. A dull or bent needle How long has it been since you’ve changed that needle? It might be time to swap it out! A needle only lasts about 8-10 hours of stitching, this amount of time may vary depending on what you are making. It’s good to have lots of needles on hand. Recommended read: When should I change the needle for machine embroidery 2. Are you using the right needle for the project? Are you embroidering heavier fabrics? Like denim or leather? If so, you’ll want to use a heavier needle size like 90/14. If you’re just embroidering mid-weight

Guide To The Three Main Machine Embroidery Stabilizers

 This article is brought to you by  Lizzsews . Here is everything that you need to know about the three main machine embroidery stabilizers. Stabilizers are important in machine embroidery; they prevent puckering and support the fabric.  The stabilizer goes underneath the fabric you are embroidering. Although there are some stabilizers that will go on top of certain types of fabric, this is called a topper.  A bottom stabilizer is always needed, you can never embroider without stabilizer, but a stabilizer topper is only needed for certain blanks. The three main types of stabilizers are cutaway, tearaway, and wash away.  The first is a cutaway stabilizer. A cutaway stabilizer can be used on clothes and many different types of fabric. The cutaway stabilizer is permanent and is mainly designed for knit fabric. It is non-woven and helps get rid of pulled or sagging stitches.  The cutaway stabilizer has a lot of stretch resistance and stays intact after wearing, using, and launderin