Skip to main content

How to sew a pillow case

Here’s how you can create a pillowcase with optional embroidery! This is a super fun project and makes amazing gifts!



This is a great first project for beginners which is why it is in my learning to sew article series! 


What you will need:

  • Fleece, flannel or cotton, 44” x 36” (or 40” x 36”)
  • Iron and ironing board 
  • Pins
  • Rotary cutter and cutting mat (or scissors)
  • Seam gauge or measuring tape  
  • Sewing machine
  • Sewing machine thread and needle
  • Optional: Embroidery thread, needle and tear-away stabilizer
  • Optional: Lego Baby Yoda embroidery design from Lizzsews Etsy shop
  • Optional: embroidery machine





The steps:


Iron fabric and cut it to 44” x 36” 




Mine ended up being a little bit less, with 40” x 36”


On the top of the fabric, the side that is 44” wide (or 40”), fold over about a 1/4 or 1/2 inch on the top and iron. You can just eye ball this fold, but if it makes you feel better you can use a seam gauge or measuring tape. 



Fold over again but this time about 4” (I did 3”) and iron. Use a seam gauge or measuring tape for this one. 



Undo this fold, it’s just preparation for the cuff/hem! (But keep the 1/4”/1/2” folded)


Optional: embroider the fabric, hoop wherever you would like your design and embroider it out! Tip: use this article to create a rectangle appliqué with Lego Baby Yoda. 



Fold the fabric in half right sides together and sew the bottom as well as the side, but not the top. 


Fold the side that is 44” (or, in my case, 40”). 


Sew with a 1/4” or 1/2” seam allowance. Make sure to backstitch!



When you get to the corner, pivot before you get to the edge, to keep the seam allowance the same as you sew. At the top of the pillowcase, sew over the 1/4” fold that you ironed before. Leave the top open (do not sew the top!) and make sure that you are sewing right sides together. 




Flip inside out and flip in the fold we made before, this should be easy because we ironed the creases! Optional: pin the fold down to keep it secure. 




Sew along the edge on the inside with a short seam allowance. When you get to the seam that you sewed before, press open the seam with your finger just for the part that you are sewing over (look at picture, I didn’t know how to explain it lol)





You’re done! Enjoy your new pillowcase! If this was your first sewing project, congratulations! You did it!

Comments

Popular posts from this blog

10 Things You Need To Start Machine Embroidery Today

How to start machine embroidery! Here’s everything that you need to get started with machine embroidery! Without spending too much! Are you interested in sewing? Here's an article for 10 things you'll need to start sewing! 1. You are going to need an embroidery machine . You can use any embroidery machine you want. Here are a couple examples: The Brother se600. This machine can do both sewing and embroidery, and is the best budget embroidery machine! I highly suggest this machine. The brother pe550D! This is an embroidery only machine, with awesome Disney embroidery designs! The brother se1900. I recommend the Brother brand for sewing and embroidery machines. 2. You are going to need somewhere to get your embroidery designs from! You can find some in my Etsy shop here ! I also suggest Creative Fabrica ! This site also has tons of embroidery designs ! For now, you can even just use the designs built into your machine! Read how to transfer the designs

Why Bobbin Thread Is Showing On The Top Of Your Embroidery Design

Almost all of us have been there! Having bobbin thread show through on the top of your embroidery project is so annoying, especially when you don't know why!  Here’s a list of questions to ask yourself and how to fix them so you can prevent your bobbin thread from showing on top! Have you cleaned the race? The other day, my bobbin thread was showing on top! And I went through all of the questions from this article and fixed them, but nothing would work!  Before I adjusted my tension (I always suggest to do whatever you can to fix the problem before adjusting tension) I tried this neat trick (I just added this to the other article), and surprisingly enough, it worked! Here’s what you do: Take a business card and use it to get the lint out from where the bobbin thread goes. You don’t want to use anything that with scratch your bobbin case.  Here’s a picture to show you how: Is your bobbin upside down? Make sure that you haven’t put your bobbin in upsi

How To Transfer Embroidery Designs To USB Stick To Embroidery Machine

Ever bought a machine embroidery design from somewhere like Etsy  or Creative Fabrica and not known how to transfer that to your embroidery machine? Or have you just purchased a design and don't know how to now transfer that design to your embroidery machine? Either way, here's how! After you have purchased an embroidery design, you will most likely get a zip file. First, you want to unzip the file. On a Chromebook you will double-tap the file On windows, you will want to right-click the file and select the option unzip  And on a Mac, you will right-click on the file and click into services, from there you will want to click unzip Yay! Now you have successfully unzipped the file! After that, you will want to drag the format that your machine uses (for example Brother is PES) to where the USB is in files.  Or you can click the format, click CTRL+C and click into the USB in files, and click CTRL+V. If you’re not sure which file format you need, no worries! You