Skip to main content

How To Sew Tea Towels

By Lizzsews

 This article is brought to you by Lizzsews.

Here’s how you can sew a set of tea towels. You can embroider and/or use decorative stitches on these if you’d like to. It’s up to you, personalize them your way! These tea towels make great gifts too.

Recommended read: How to sew scrunchies




These tea towels are a great quick and easy project for all skill levels!


What you will need:

  • Cotton fabric, one fat quarter (18” x 21”)
  • Rotary cutter and cutting mat (or scissors)
  • Pins
  • Iron and ironing board 
  • Measuring tape
  • Sewing thread
  • Sewing machine
  • Rotary cutter and self-healing cutting mat
  • Machine sewing needle, 80/12
-
Optional: 

-embroidery machine
-embroidery thread and tear away or cutaway stabilizer
-embroidery thread
-machine embroidery needle, 75/11


The steps:


   1. Iron the fabric. 



Tea towels are often 18” x 28” but when making your own you can choose your own dimensions. One-quarter of a meter is the perfect size to not waste fabric.


   2. If you are not using a fat quarter cut a piece about 18” x 21” or 18” x 22” depending on how wide your fabric is. After straightening and cutting my fat quarter fabric’s edges, it ended up being a bit smaller and was around 17” x 21”


   3. Fold the edges of the fabric over and iron in place. 



   4. Fold the edges of the fabric over one more time and iron. Pin in place. 



   5. Sew along these edges with either a straight stitch or a decorative stitch. 


Recommended read: Learning to sew article series



   6. On the corners, continue to sew straight until the end, backstitch until you get in line with the edge on the other side. Pivot the presser foot horizontally, backstitch all the way to the end and continue to sew along. Repeat this for each corner






   7. Optional: if you’d like to feel free to embroider your tea towel! Embroider it how you would any other cotton fabric. My fabric was already full of fun designs, so I opted out of the embroidery part. 


Here’s how you can fold your tea towel to look nice at the table:


   1. With the finished side down, fold the tea towel together horizontally. 



   2. Fold the bottom up about 2” 



   3. Fold the bottom over one more time to create a pocket



   4. Flip the fabric over and make about a 1” vertical fold on left side 



   5. Fold the right side over to meet the fold and tuck the fold into the pocket




   6. Fold the top of the fabric down to meet the bottom 



   7. Flip the fabric over and your tea towel is complete!




Recommended read: How to sew an overcasting stitch
Recommended read: How to sew bias tape
Recommended read: How to sew quick and easy coasters

Leave a comment below and let me know if you made this tea towel! I would love to see your creations in Lizzsew's Facebook group too! And don't forget to subscribe to stay up to date with all of Lizzsews new articles. See you next time!
Labels:

Comments

Post a Comment

Popular posts from this blog

10 Things You Need To Start Machine Embroidery Today

By Lizzsews
 This article is brought to you by  Lizzsews . How to start machine embroidery! Here’s everything that you need to get started with machine embroidery! Without spending too much! Are you interested in sewing? Recommended read:  10 things you'll need to start sewing! 1. You are going to need an embroidery machine . You can use any embroidery machine you want. Here are a couple of examples: The Brother se600. This machine can do both sewing and embroidery, and is the best budget embroidery machine! I highly suggest this machine. The brother pe550D! This is an embroidery-only machine, with awesome Disney embroidery designs! The brother se1900. I recommend the Brother brand for sewing and embroidery machines. To note here: determine your budget, determine how much you have to spend on embroidery supplies (and blanks ) and how much you have to spend on your machine. Purchase the largest embroidery hoop that you can afford! The se600 is an amazing machine and I highly recomm
5 comments
Read more

8 Reasons Why Your Upper Thread Is Shredding On Your Embroidery Machine

By Lizzsews
 This article is brought to you by  Lizzsews . Here are some reasons why your top thread might be shredding while you’re embroidering! Starting machine embroidery is definitely a challenge, and troubleshooting is hard.  Recommended read: 10 Things you need to start machine embroidery today Often when your top thread is shredding, it’s caused by when the thread goes through the eye of the needle or while it’s going through the thread guides.  1. A dull or bent needle How long has it been since you’ve changed that needle? It might be time to swap it out! A needle only lasts about 8-10 hours of stitching, this amount of time may vary depending on what you are making. It’s good to have lots of needles on hand. Recommended read: When should I change the needle for machine embroidery 2. Are you using the right needle for the project? Are you embroidering heavier fabrics? Like denim or leather? If so, you’ll want to use a heavier needle size like 90/14. If you’re just embroidering mid-weight
Post a Comment
Read more

Guide To The Three Main Machine Embroidery Stabilizers

By Lizzsews
 This article is brought to you by  Lizzsews . Here is everything that you need to know about the three main machine embroidery stabilizers. Stabilizers are important in machine embroidery; they prevent puckering and support the fabric.  The stabilizer goes underneath the fabric you are embroidering. Although there are some stabilizers that will go on top of certain types of fabric, this is called a topper.  A bottom stabilizer is always needed, you can never embroider without stabilizer, but a stabilizer topper is only needed for certain blanks. The three main types of stabilizers are cutaway, tearaway, and wash away.  The first is a cutaway stabilizer. A cutaway stabilizer can be used on clothes and many different types of fabric. The cutaway stabilizer is permanent and is mainly designed for knit fabric. It is non-woven and helps get rid of pulled or sagging stitches.  The cutaway stabilizer has a lot of stretch resistance and stays intact after wearing, using, and launderin
1 comment
Read more