Skip to main content

10 Things You Need To Start Machine Embroidery Today

 This article is brought to you by Lizzsews.

How to start machine embroidery! Here’s everything that you need to get started with machine embroidery! Without spending too much!


Are you interested in sewing? Recommended read: 10 things you'll need to start sewing!

1. You are going to need an embroidery machine. You can use any embroidery machine you want. Here are a couple of examples:
  • The brother pe550D! This is an embroidery-only machine, with awesome Disney embroidery designs!
  • The brother se1900.
I recommend the Brother brand for sewing and embroidery machines.

To note here: determine your budget, determine how much you have to spend on embroidery supplies (and blanks) and how much you have to spend on your machine. Purchase the largest embroidery hoop that you can afford! The se600 is an amazing machine and I highly recommend it, but you will outgrow that 4x4 hoop quick. But, it is also an amazing budget machine, and the next hoop size up is quite a jump in $. So, determine your budget and research.

2. You are going to need somewhere to get your embroidery designs!
Read how to transfer the designs you purchase onto your machine.


3. You are going to need stabilizers. The stabilizer prevents many problems from happening, like puckering.

Lots of people use multiple different types of stabilizers, but there are three main types.
First, cutaway stabilizer. A cutaway stabilizer can be used on clothes and tons of different types of fabric, some people even use cutaway on the back of towels too.


I use cutaway the most, and I purchase it pre-cut, you can also get it in rolls. I think that you will find that pre-cut is much more convenient!
Second, tearaway. If you are on a tight budget then this one is probably not a necessity.

It’s very convenient if you have a lightweight design (not dense) because you can tear it away and you don’t have to have a stabilizer showing on the back.
If you wear it don't tear it
This saying means that if you are embroidering a piece of clothing or something that you wear, use a cutaway stabilizer and not a tearaway stabilizer.

Recommended read: What is tear away stabilizer

Third, wash away. Also known as a water-soluble stabilizer. This stabilizer is mainly used as a topping on towels or material that the design might sink into.

Wash away is mainly used to prevent the embroidery design from sinking into the fabric.

Recommended read: Guide To The Three Main Machine Embroidery Stabilizers

4. You’re going to need embroidery thread. A lot of people have problems with their thread shredding or breaking.

I suggest New Brothread, this brand also has multiple great reviews, and you can get multiple different thread sizes!

I also suggest getting these spool savers as embroidery thread unravels easily!


Also, you’re going to need somewhere to store your thread, for example, you can use a thread rack.

But, the cheapest way to store them is to put them in a shoebox!
5. You’re going to need some bobbin thread. You can buy bobbin thread and wind your own bobbins, but it's so much easier to just buy pre-wound bobbins to start out.

The only problem with winding your bobbins is that it might cause problems like bobbin thread showing on top.


Depending on your machine you will be using 60wt or 90wt. I use the Brother se600, and it takes a 60wt bobbin thread.

The reason you can't use normal embroidery thread as your bobbin thread is that the normal embroidery thread is 40wt.
Make sure that you check that the bobbin will fit your machine. If you have a Brother se600 it might not be listed in the description, so look for Brother se400 in the description compatibility list!

Recommended read: Should you use prewound bobbins for machine embroidery
6. On your machine is a thread holder. Don’t use it! It has only caused trouble!

Get a cup and place it behind your machine with your thread in it. This is a replacement for a thread stand.

What the cup or thread stand does, is it lets the thread be relaxed longer before it goes into the thread guides.

Recommended read: why you should use a thread stand.
7. Embroidery machine needles.

Your machine will come with some, but you are going to want more in case they break or bend and they will get dull.



8. You’re going to need a hoop. Your machine will come with a hoop, but you might want to purchase more, like a repositionable hoop.

A repositionable hoop allows you to do designs that are bigger than the area your machine does. For example, on machines that have a 4 X 4 embroidery area, you can purchase a 6.75 X 4 repositionable hoop.

The only problem with repositionable hoops is that you have to split the design and to split an embroidery design you have to have machine embroidery software.

Before learning to use a repositional hoop, I recommend first learning how to use your machine and how to embroider.


9. Everything else will come with your machine!

There will be scissors that come with your machine, but you'll probably want to purchase curved ones.

Curved scissors will help get those pesky jump stitches! They will also help if you want to do applique!

Recommended read: How to cut those pesky jump stitches

10. Patience! There is a big learning curve for machine embroidery, but I know you can do it! Just have patience! If you're having problems, here's a bunch of articles to help you troubleshoot.

Recommended: Embroidery projects
Recommend read: Where to get blanks
Recommended read: Is Machine Embroidery Too Difficult For Me?

Be sure to like and leave a comment to let me know what you think! And don't forget to subscribe to get notified for my next blog post!

Comments

  1. Thank you so much for your insights! They are very much appreciated and I can’t wait to start Embroidery.

    ReplyDelete
    Replies
    1. Thank you! Goodluck on your embroidery journey!

      Delete
  2. Spot on with this write-up, I truly think this website needs much more consideration. I’ll probably be again to read much more, thanks for that info.
    Texas A&M Aggies embroidery

    ReplyDelete
    Replies
    1. Thank you so much! That is very kind of you!!

      Delete
  3. This is quite a helpful post for an ammeter like me

    Buy Domestic Sewing Machine Parts

    ReplyDelete

Post a Comment

Popular posts from this blog

8 Reasons Why Your Upper Thread Is Shredding On Your Embroidery Machine

 This article is brought to you by  Lizzsews . Here are some reasons why your top thread might be shredding while you’re embroidering! Starting machine embroidery is definitely a challenge, and troubleshooting is hard.  Recommended read: 10 Things you need to start machine embroidery today Often when your top thread is shredding, it’s caused by when the thread goes through the eye of the needle or while it’s going through the thread guides.  1. A dull or bent needle How long has it been since you’ve changed that needle? It might be time to swap it out! A needle only lasts about 8-10 hours of stitching, this amount of time may vary depending on what you are making. It’s good to have lots of needles on hand. Recommended read: When should I change the needle for machine embroidery 2. Are you using the right needle for the project? Are you embroidering heavier fabrics? Like denim or leather? If so, you’ll want to use a heavier needle size like 90/14. If you’re just embroidering mid-weight

Guide To The Three Main Machine Embroidery Stabilizers

 This article is brought to you by  Lizzsews . Here is everything that you need to know about the three main machine embroidery stabilizers. Stabilizers are important in machine embroidery; they prevent puckering and support the fabric.  The stabilizer goes underneath the fabric you are embroidering. Although there are some stabilizers that will go on top of certain types of fabric, this is called a topper.  A bottom stabilizer is always needed, you can never embroider without stabilizer, but a stabilizer topper is only needed for certain blanks. The three main types of stabilizers are cutaway, tearaway, and wash away.  The first is a cutaway stabilizer. A cutaway stabilizer can be used on clothes and many different types of fabric. The cutaway stabilizer is permanent and is mainly designed for knit fabric. It is non-woven and helps get rid of pulled or sagging stitches.  The cutaway stabilizer has a lot of stretch resistance and stays intact after wearing, using, and launderin